Subscribe Now and Get Discount 10%
Be the first to learn about our latest trends
Error: Contact form not found.
Audio
DBB 18-1 D-Audio Subwoofer box
89,00 € – 99,00 €In the world of professional audio, the D-AUDIO DBB 18-1 stands tall as a testament to excellence. With compatibility with top-tier speakers from B&C and RCF, coupled with the durability of 1st class plywood and the convenience of the Adam Hall Hardware EVOLUTIVE HANDLE, this speaker box is poised to deliver an unparalleled audio experience. Elevate your sound game with the D-AUDIO DBB 18-1 ? where quality meets performance.
Select options
This product has multiple variants. The options may be chosen on the product page
SP-75 Wall bracket series
1,00 €Load bearing: 60 kg
Weight: 1.6 kg / pair
Material: Steel
Packing: 12 pairs
DCT-COBRA Top
1,00 €DCT-COBRA Top is a 3-Way cabinet for use in compact line arrays and other demanding applications where wide horizontal coverage, extremely low distortion and a low sensitivity against acoustic feedback are mandatory.
The mid-range of the DCT-COBRA Top uses selected D-AUDIO C8 cone transducers in a line array configuration. The C8 transducers show significantly lower distortion than typical horn/compression driver combinations. Therefore an extremely natural sound quality over large distances can be achieved.
For the high frequencies of the DCT-COBRA Top an Electro-Voice DH2T titanium diaphragm driver and a HPT94 constant directivity horn are used in order to prevent any set-up and adjustment problems for the main direction and the near field
DF-17 pwh Subwoofer box
1,00 €The DF 17 PWH is concepted as a straight waveguide horn with a vented transducer cabinet. The recommended active x-over frequency is 160 Hz, 18 dB/oct. Butterworth. The 18″ EVX 180A OEM loudspeaker chassis is reliably protected against critical power levels and short thermal overload by thermo switches and 4-way halogen lamp protection. The DF 17 PWH cabinet is made of poplar plywood 18 mm. All corner joints and braces are grooved and glued. Braces are screwed additionally in order to reduce natural resonances to a minimum. The cabinet surface is finished in extremely resistant needled black-mottled felt. A powder-coated steel grid and an acoustic foam front protects the speaker front. The connector panel uses two 4-pole Speakon connectors (Input/Output) for safe connection and easy chaining to the next loudspeaker. The 2 handle trays on the sides guarantee easy and safe transport. 4 large-sized rubber feet and 4 castors allow easy handling and safe stand. A recessed speaker-stand threaded flange on the top allows various setups (clusters, sidefill, top).
DKS-21 Subwoofer box
1,00 €DKS21 is a compact reference subwoofer designed to extend the bandwidth of A15 and A10 systems. DKS21 features one high excursion, direct radiating 21?? transducer mounted in a bass-reflex tuned enclosure.
DKS21 couples with A15 and A10 to reinforce contour and extend bandwidth to 29 Hz and 31 Hz respectively. KS21 features L-Vents that substantially reduce turbulence and port
noise at high levels while also increasing LF efficiency. The association of modern components and laminar vents greatly improves short-term SPL compared to similar-sized subwoofers.
The DKS21 frequency response is optimized to couple perfectly with both systems. DKS21 features a two-point, integrated rigging system that is compatible with A15. Combinations of
DKS21 and A15 can be flown or stacked to form a full range line source. DKS21 also integrates a threaded insert to enable pole-mount configurations of A15 or A10.
DKS21 can be deployed in standard or cardioid configurations with dedicated presets, for flown and stacked deployment.
DFX-20 Subwoofer box
1,00 €The FX20-PRO is a horn-loaded subwoofer with an Electro-Voice EVX180B 18?? high performance transducer. Nominal impedance is 8 Ohm, power handling 600 W RMS. Power amps up to 1200 W/8 Ohm can be used in order to have? maximum dynamic range without the danger of thermal overload in noncontrolled situations. The sensitivity of the cabinet is 101 dB/1 W/1 m, the maximum SPL is 135 dB. The driver is protected by a ?Voice Coil Tracking? system called protection circuitry which prevents overheating.
Recommended crossover frequencies are 80 to 140 Hz depending on the application. The housing is made of 15 mm birch plywood and coated with a very robust textured paint. The front grille is made of powder coated steel. 4 casters and 4 ergonomic handles provide simple handling.
? 600 W EVX 180B transducer
? 30?150 Hz (-10 dB)
? High-efficiency planar waveguide design
? Voice coil tracking protection
